Comply with the instructions and requirements of inspection test dossiers and basic electrical testing method.
Review and check construction and vendor drawings for verifications. Performed electrical testing as follows;
High potential test for HV equipments.
Insulation resistance test for HV and LV equipments.
Polarization index test for HV and large capacity LV equipments.
Instantaneous, short time and long time trip test for circuit breakers (ACB &MCCB).
Current and potential transformer ratio test.
Contact or low resistance test for equipments bus bar joints and circuit breakers conductivity in closed position.
Simulation test for motor starters.
Rectify punch list and prepare red line marked-up for modifications and as-built
Perform various duties associated with installation, maintenance, troubleshooting, upgrading and calibration of pneumatic and electronics instrumentation.
Configuration, installation and start up of PLC, field devices, valves, sensor and monitoring vibrating system and other instrumentation.
Operation and maintenance of the equipment/machine used in industrial process control.
Maintain and adjust instrument in the plant to ensure their correct function.
Set up equipment, provides line support and perform corrective and preventive maintenance.
Install, repair, calibrate, test and maintain electronics, pneumatic or mechanical control equipment, includes transmitter, switches, actuated valves and fire detection system.
Perform diagnostic maintenance on basic process control system including boiler and compressor.
Perform preventive and emergency maintenance on all instruments, prepare and record all details of equipment maintenance.
Testing and energization of various electrical equipments.
FPSO, Offshore platform, Offshore Rigs
Good exposure in construction and commissioning in the Oil & Gas industry
Knowledge of the following:
Switch gear systems
Computer skills : word, Excel, MS project